Shanghai Saking Grouting System Ltd

chemical grouting(1)

Shanghai Saking Grouting System Ltd

Showing 11 - 20 of 21, total 3 pages [First] [Previous] [Next] [Last]

agitator tanks
Specification: DMARGROUT-MIX-800
Detail: 800 liter capacity Agitation tanks are used to provide a storage reservoir for mixed batches of grout from the high speed high shear mixer. Three main functions: I) Releases any air bubbles trapped during the mixing proce...

cable duct grout
Specification: DMARGROUT® 818
Detail: ***RGROUT® 818 cable groutis a non-shrink, cementitious aggregate-free grout with a unique 2 phase shrinkage compensating mechanism. It is non-metallic and contains no chlorides with a special blend of shrinkage-reducing a...

low viscosity epoxy resin injection
Specification: DMEP-D-GJ-30
Detail: Description A solvent-free, 2-component super low viscosity-liquid, based on high strength epoxy resins. Specially for injecting into cavities and cracks in concrete. Uses To fill and seal cavities and crack in structural c...

microfine cement
Specification: DMFC-1200
Detail: Microfine Cements are blast furnace slag based cements composed of ultrafine particles and are designed for injection into loose soils, rock and concrete. They feature a maximum grain size ranging from a D95 of 6Âµm to a D95 o...

flat head injection packer
Specification: F13
Detail: Type F-13 F-17 F-19 Dimensions(D*L) 13*110~400(mm) 17*11~420(mm) 19*160~420(mm)

high speed mixer
Specification: DMARGROUT®-MIX-400
Detail: The high speed mixers are used for wet dispersing and mixing liquid-solid material. . Main technical data Type 400 800 Capacity£¨L£© 400 800 The water and cement ratio allowed ¡Ý0.5 ¡Ý0.5 ...

hand operated grout pump
Specification: MG808
Detail: Hand operatedGrout Pump MG-808 The MG-808 is a hand-operated, positive piston pump designed to pump a wide variety of low-viscosity and good fluidity slurries, especially for grouting cement mortar and chemical pulp. It's ...

polyurethane water stop foam(hydrophobic)
Specification: DM510
Detail: Characteristic: 1. Single fluid, no need to mix with another liquid; 2. It has a good hydrophilicity, and it can react to water so as to block up high pressure water. 3. It can bond with concrete firmly, and can create hi...

injection packer
Specification: A10
Detail: The most commonly used packer, several sizes and lengths available. Superior design, hex-neck for easy tightening

grouting machine
Specification: S812
Detail: The electric high pressure grouting pump S-812 is a professional machine used for fabric high pressure chemical grouting, which works with single chemical grouting material. It can produce high pressure itself. When there are ...


Showing 11 - 20 of 21, total 3 pages [First] [Previous] [Next] [Last]
1 2 3